Installation Guide

14
Fire hazard
When positioning the device,
ensure the supply cord is not
trapped or damaged.
•Do not locate multiple portable
socket-outlets or portable power
supplies at the rear of the device.
Keep the ventilation openings on
the device housing or in installa-
tions free of obstructions.
Do not use any mechanical objects
or other media to speed up the
defrosting process, unless they
have been recommended by the
manufacturer for this purpose.
Do not damage the refrigerant
circuit.
!
CAUTION! Failure to obey
these cautions could
result in minor or
moderate injury.
Health hazard
Please check if the cooling
capacity of the device is suitable
for storing the food or medicine
you wish to cool.
Food may only be stored in its
original packaging or in suitable
containers.
Opening the lid for long periods
can cause significant increase of
the temperature in the compart-
ments of the device.
Clean regularly surfaces that can
come in contact with food and
accessible drainage systems.
Store raw meat and fish in suitable
containers in the device, so that it
is not in contact with or can drip
onto other food.
If the device is left empty for long
periods:
Switch off the device.
Defrost the device.
Clean and dry the device.
Leave the lid open to prevent
mould developing within the
device.
A
NOTICE! Damage hazard
Only carry the cooling device
upright.
Check that the voltage specifica-
tion on the type plate corresponds
to that of the energy supply.
Do not use electrical devices
inside the cooling device unless
they are recommended by the
manufacturer for the purpose.
Hazard from excessively low
temperature
Ensure that only those objects are
placed in the cooling device that
are intended to be cooled at the
selected temperature.
The cooling device shall not be
exposed to rain.
CFX3_SOM_APAC(en).book Seite 14 Donnerstag, 31. Oktober 2019 4:16 16