Operating instructions

EN
Operation CoolFreeze CDF11
14
A
I
➤ Press the “ON/OFF” (fig. 2 1, page 10) button for three seconds.
✓ The “POWER” LED (fig. 2 2, page 10) lights up green.
When the cooler reaches the preset temperature, the LED lights up orange.
✓ The display (fig. 2 5, page 10) switches on and shows the current cooling
temperature.
✓ The cooler starts cooling the interior.
6.8 Setting the temperature
➤ Press the “SET” button once.
➤ Use the “+” and “–” buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
6.9 Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
➤ Switch on the cooler.
➤ Press the “SET” button twice.
➤ Use the “+” and “–” buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
NOTE
During normal operation the emergency switch (fig. 1 12, page 8) has
to be set to the “Normal” position.
CDF11-O-AU.book Seite 14 Donnerstag, 19. Oktober 2017 2:51 14