Operating instructions

EN
Technical description CoolFreeze CDF11
10
5.2 Control panel
Item Description Explanation
1 On/Off button Switches the cooler on or off when the button is pressed for
between one and two seconds
2 POWER Status indication
LED lights up green Compressor is on; preset
temperature isn’t reached
yet
LED lights up orange Preset temperature is
reached
LED flashes orange Insufficient voltage
3 ERROR LED flashes red Device is switched on but
not ready for operation
4 SET Selects the input mode
• Set Temperature
• Set temperature unit (Celsius or Fahrenheit)
• Set battery monitor
5 Display Shows the temperature inside the cooling compartment
The first three digits of the four-digit display show the
temperature, the fourth digit shows the temperature unit
(°C or °F).
In case of an error the display shows the error message
“Err1” or “Err2”.
6 + Press once to increase the value
7 – Press once to decrease the value
POWER
FRIDGE FREEZER
ERROR
12 34 5 6 7
2
CDF11-O-AU.book Seite 10 Donnerstag, 19. Oktober 2017 2:51 14