Product Manual

EN
Troubleshooting MWO24
16
F.03 Internal voltage supply
default
➤ Press the button for more than
3 seconds to turn off the microwave oven.
➤ Contact the manufacturer’s branch in your
country (see the back of the instruction
manual for the addresses) or your specialist
dealer.
F.04 Low-voltage protection
tripped
The display shows the symbol and ERROR
and the current voltage is displayed.
You hear 2 signal tones at an interval of one
second.
After 10 seconds, the microwave oven switches
off.
➤ Check the charge state of the vehicle
battery.
➤ If necessary, start the vehicle engine to
charge the vehicle battery.
F.05 Overvoltage protection
tripped
The display shows the symbol and ERROR
and the current voltage is displayed.
You hear 2 signal tones at an interval of one
second.
After 10 seconds, the microwave oven switches
off.
There is a fault in the 24 V on-board supply.
➤ If necessary, turn off the vehicle engine.
➤ Turn the microwave oven on again.
➤ If the error code is still displayed, then
contact your vehicle dealer or a workshop.
F.06 Overheating of the
electronics
➤ Press the
button for more than
3 seconds to turn off the microwave oven.
➤ Wait at least 30 minutes before you put the
microwave oven back into operation.
➤ If the error code continues to be displayed,
contact the manufacturer’s branch in your
country (see the back of the instruction
manual for the addresses) or your specialist
dealer.
Error code Fault Explanation/remedy
MWO24-O-16s.book Seite 16 Donnerstag, 1. Dezember 2016 1:23 13