Product Manual

Connecting the awning (only PR2500) PR2000, PR2500

• Observe the required cable cross section when connecting to the power supply:

Legend to fig. 8, page 7:

Installing the wall switch

➤ Find a suitable location inside the motor home, out of direct sunlight, to install the

switch.

Installing the receiver of the remote control and connecting the electrical

connections

➤ Find a suitable location inside the motor home, out of direct sunlight, to install the

mounting bracket for the remote control.

➤ Connect the motor with the remote control in accordance with the applicable

electrical engineering regulations and the circuit diagram (fig. 8, page 7).

Cable length Required cable cross section

2 m 1.5 mm²

4 m 2.5 mm²

6 m 4.0 mm²

8 m 6.0 mm²

No. Description

1 Receiver

2 3 A fuse for LED awning light (optional)

3 on Orange line for D+ connection

4 rd Red line for LED awning light (optional)

5 bk Black line for LED awning light (optional)

6 bu Blue line for motor connection

7 bn Brown line for motor connection

8 bk Black line for power supply

9 rd Red line for power supply

10 Main switch

11 15 A fuse for main switch

PR2000_PR2500-I-16S.book Seite 18 Donnerstag, 5. Oktober 2017 10:15 10