Specifications

ENGLISH 19
HVAC SYSTEM POWERED BY INVERTER - SINGLE STARTING/HOUSE BATTERY BANK -
SHOREPOWER CAPABILITY
Alternator
Battery 1
Battery 2
Battery 3
-
+
+
-
+
-
+
-
HVAC Unit
Dometic Environmental
HVAC System Powered by
Inverter. Single starting/house
Battery Bank. Shore power capability.
NOTES: 1)
ALL
Batteries must be of the AGM deep cycle type
2) Alternator must be upgraded. Discuss with Dometic
Applications Department for recommendation. 3) Inverter must be of approved type by Dometic in order to insure proper operation of system. 4) All added DC cables shall be of 2/0 size or larger, unless otherwise noted on the drawing. 5) Battery bank may be as many or few batteries in order to provide the desired run time.
-
Battery 4
Battery 5
+
--
+
Battery 6
Overcurrent
Protection
120VAC Line
DC Wiring AC Wiring
Shorepower Inlet
Inverter with Shorpower pass- through OR inverter/cherger
+
Starter
Add at least a 3/0 size cable from the alternator positive to the starter positive lug. 3/8" ring terminal at the alternator, 1/2" at the starter.
Factory Starter Cable
+
+
-
Factory Negative alternator Cable
Factory Positive alternator Cable
Primary (OEM) Box
Secondary Box
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF DOMETIC CORPORATION. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF DOMETIC CORP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
NEXT ASSY
USED ON
APPLICATION
DIMENSIONS ARE IN INCHES
TOLERANCES: FRACTIONAL ANGULAR: MACH
BEND
TWO PLACE DECIMAL THREE PLACE DECIMAL
INTERPRET GEOMETRIC TOLERANCING PER:
MATERIAL
FINISH
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
COMMENTS:
DATE
NAME
TITLE:
SIZE
B
DWG. NO.
REV
WEIGHT:
SCALE: 1:1
UNLESS OTHERWISE SPECIFIED:
B
KEA
9/29/08
SHEET 1 OF 1
Battery 6
DO NOT SCALE DRAWING
Battery-Powered Systems Installation Guidelines