Product Manual

EN
RUC6408X, RUC8408X Cleaning and maintenance
47
10 Cleaning and maintenance
!
A
➤ Clean the refrigerator regularly and as soon as it becomes dirty with a damp
cloth.
➤ Make sure that no water drips into the controls. This can damage the electronics.
➤ Wipe the refrigerator dry with a cloth after cleaning.
➤ Check the condensate drain regularly.
Clean the condensate drain when necessary. If it is blocked the condensate
collects on the bottom of the refrigerator.
11 Troubleshooting
Faults and beeps
I
Faults are indicated on the display by highlighting the middle section with a red
banner and a code. The faults that terminate the complete cooling function are
displayed on the screen in combination with a beep.
WARNING!
Always disconnect the refrigerator from the mains before you clean and
service it.
NOTICE!
•
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the refrigerator.
•
Never use hard or sharp tools to remove ice or to free objects frozen
onto the device.
•
Do not use any mechanical tools or any other tools to speed up the
defrosting process.
NOTE
•
The beep signal can be muted once by pressing the control knob
shortly or muted permanently by selecting the mute icon in the
setting menu.
•
If the refrigerator door is open for more than 2 minutes the beep
signal will sound in combination with a flashing warning code. This
signal turns off after the door is closed.
RUC8408X--IO-AU.book Seite 47 Montag, 13. August 2018 1:33 13