Product Manual

EN
RPD190, RPD218 Using the refrigerator
19
Connecting the refrigerator to AC mains
D
Proceed as follows when you connect the refrigerator to the AC mains:
Plug the connector into the AC socket.
7 Using the refrigerator
I
7.1 Energy saving tips
Choose a well ventilated location which is protected from direct sunlight.
Allow warm food to cool down first before placing it in the device to keep cool.
Do not open the refrigerator more often than necessary.
Do not leave the doors open for longer than necessary.
Defrost your refrigerator periodically when a layer of ice forms.
Avoid unnecessarily low temperature settings.
Clean dust and dirt from the condenser at regular intervals.
DANGER! Danger of fatal injury!
Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
If you are operating your refrigerator on a boat with an AC mains
connection using a shore connection, you must install a residual
current circuit breaker between the AC mains and the refrigerator.
Seek advice from a trained technician.
NOTE
Before starting the refrigerator for the first time, you should clean it inside
and outside with a damp cloth for hygienic reasons (please also refer to
the chapter “Cleaning and maintenance” on page 29).
RPD190-218--IO-AU.book Seite 19 Montag, 24. Oktober 2016 5:08 17