Product Manual

EN
Installing and connecting the refrigerator RPD190, RPD218
18
Key to the figure
A
➤ Before starting up the device for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
➤ Connect the cable to the refrigerator DC terminal block (1).
➤ Connect the refrigerator
– as directly as possible to the poles of the battery or
– to a plug socket which is fuse protected with at least 15 A (at 12 V) or
7.5 A (at 24 V).
Coordinate axis Meaning Unit
l Cable length m
∅ Cable cross section mm²
NOTICE!
Make sure the polarity is correct.
1
0
RPD190-218--IO-AU.book Seite 18 Montag, 24. Oktober 2016 5:08 17