Product Manual

EN
RPD190, RPD218 Installing and connecting the refrigerator
15
Proceed as follows to install the refrigerator:
➤ Fit the drain hose to the drain spout at the rear of the cabinet (1).
➤ Drill a hole for the drain water hose (e.g. through the floor (2).
➤ Run the drain water hose through the hole. Make sure that the hose does not
kink.
➤ Seal between the drilled hole and the drain water hose.
➤ Push the refrigerator into the recess.
21
5
RPD190-218--IO-AU.book Seite 15 Montag, 24. Oktober 2016 5:08 17