Product Manual

RPD190, RPD218 Installing and connecting the refrigerator

Key to fig. 3, page 12

Observe the following instructions when installing:

• Install the refrigerator so that the hot air produced can easily flow away. To

achieve this make sure there is adequate ventilation (fig. 3, page 12).

• Allow the device to rest in a vertical position for at least four hours before you

connect it to the power supply so that the oil can flow back into the compressor.

No. Description Action

1 Compressor shelf – produces heat –

For optimum performance at high ambient temperatures:

2 Cool intake air – external vent Fit inlet vent to exterior wall – position

below compressor shelf

3 Hot waste air – external vent Fit outlet vent to exterior wall –

position above compressor shelf

For low to moderate ambient temperatures:

4 Cool intake air grille –

5 Hot waste air grille –

RPD190-218--IO-AU.book Seite 13 Montag, 24. Oktober 2016 5:08 17