User manual

VT100DIG Technical description
EN
11
5.2 Control elements
You will find the following control elements on the transmitter module:
The receiver module has the following control elements:
No. in
fig. 6, page 5
Meaning
1 Antenna connection
2 Pairing button
3 Operating mode display:
• LED glows red when signals are being transmitted
• LED flashes red when the components are being paired
4 Camera connection
5 Blue cable (CAMERA POWER TRIGGER): voltage supply for camera and
switch input for protective cover of CAM80 (see page 15)
6 Green cable (REVERSE TRIGGER): control cable for activating the pairing
signal
7 Red cable (DC INPUT): Connection to the positive terminal of the
voltage supply; preferably ignition plus
8 Black cable (GND): Connection to the negative terminal of the voltage
supply or earth
No. in
fig. 7, page 5
Meaning
1 Antenna connection
2 Pairing button
3 Operating mode display:
• LED glows red when signals are being transmitted
• LED flashes red when the components are being paired
4 Monitor connection
5 Green cable (REVERSE TRIGGER): control cable for activating the pairing
signal
6 Black cable (GND): Connection to earth
VT100DIG-IO-16s.book Seite 11 Montag, 1. August 2016 2:46 14