User manual

Technical description AMP100
EN
10
5.1 Connections
The control box has the following connections:
No. in
fig. 5, page 5
Connection description
3 AV output (cinch plug) for connecting...
• to a navigation system with an AV input (cinch socket)
• to another monitor with an AV input (cinch socket) or to a video recorder
4Camera connection
5 Green control cable (+ signal) for connecting the positive cable of the
reversing light
When you shift into reverse gear, the control box is activated via this cable.
6 Black control line (+ signal) with flat plug fitting for connection of the
RV-AMP-SW rocker switch.
This line must be connected when a video source in addition to the
reversing video camera – such as a navigation system or DVD player – is
connected to the monitor and you would like to activate the camera when
parked or driving forwards.
7 Black control line (+ signal) with round plug lug for connection to the
monitor’s S/BY signal input.
The monitor is switched on via this line when the control box is activated.
8 Red cable: connection to 12 V to 24 V positive (e.g. connected positive
terminal, terminal 15)
9 Brown cable: connection to earth (terminal 31)
AMP100-IO-16s.book Seite 10 Mittwoch, 26. Oktober 2016 11:15 11