User manual

EN
PerfectPower Rectifying faults
15
10 Rectifying faults
11 Guarantee
The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Fault Cause Remedy
No output voltage No contact to the battery Check contact and cable.
Switch on the ignition if
necessary.
PP152/PP154: If necessary
check and replace the 12 V
and 24 V vehicle socket.
No output voltage Overheating Switch off power consuming
devices.
Let the inverter cool down
and ensure better ventila-
tion.
No output voltage Defective fuse (in the inverter or
the vehicle)
Replace the the fuse with
one of the same specifica-
tions.
No output voltage Device defective Replace the device.
The device switches on
and off repeatedly
Excessive constant load Reduce the load.
The inverter switches off
when the consumer is
switched on
Starting current too high Compare the device power
with the maximum power of
the inverter.
The output voltage is too
low.
Batter voltage below 10.8 V
(PP152/PP402/PP602) or
21,5 V (PP154/PP404/PP604)
Charge the battery (start the
engine).
PP150-PP400-PP600--IO-16s.book Seite 15 Mittwoch, 18. Januar 2017 1:13 13