User manual

SinePower Using the inverter

Switching to energy-saving mode

You can set the energy-saving mode using the S4, S5 and S6 dip switches. In this

way, the battery you connect to the inverter is not discharged as quickly.

The inverter operates in energy-saving mode as long as the required power is below

the set level. If the required power exceeds the set level, the inverter works in normal

mode.

The values to be set on your inverter can be found in the following table:

Defining settings

Using the S8 dip switch you can define whether the parameter of the setting should

be made using the connection for the remote control or the dip switches.

Energy-saving mode

DIP switch

S4 S5 S6

Off Off Off Off

2% On Off Off

3% Off On Off

4% On On Off

5% Off Off On

6% On Off On

7% Off On On

8% On On On

Dip switch

Parameter S8

Remote control connection Off

Dip switch On

MSI2300-3500--IO-16s.book Seite 25 Mittwoch, 3. August 2016 5:46 17