User manual

EN
SinePower Technical description
15
7.1 Control elements
Control elements of the inverter (fig. 5, page 4)
7.2 Connections
I
Connections of the inverter (fig. 5, page 4)
Item Description Description
1 Dip switch Makes settings on the inverter (such as mains
voltage, mains frequency, energy-saving
mode).
2 LED See chapter “Status indications” on page 23
3 Main switch
“ON/OFF/REMOTE” switch
Switches the device on, off or to operation via
the remote control (accessory)
4 Fuse Protects the inverter from overload.
The fuse can be pressed in again once it has
triggered.
5 Grounding screw Sets or removes the grounding bridge
NOTE
The version for continental Europe is depicted.
Item Description Description
6 AC input 230 Vw input jack
7 AC output 230 Vw output jack
8 Earth terminal Earthing on the vehicle bodywork
9 POS+ Positive terminal
10 CAN1 and CAN2 port CAN BUS connections
11 Green terminal Setup of remote switch and parallel operation
12 RS-232 port, REMOTE port Connection of a PC using a serial RS-232
interface or connection of the MCR7 or
MCR9 remote control
13 NEG– Negative terminal
14 LCM Remote control connection
MSI2300-3500--IO-16s.book Seite 15 Mittwoch, 3. August 2016 5:46 17