User manual

SinePower Mounting the inverter

MSI1800TOE

The inverter has the following connections, displays and control elements on the

front:

8 Mounting the inverter

8.1 Tools required

For the electrical connection you will need the following tools:

• Crimping tool

• 3 multi-coloured, flexible connection cables. You can see the required cross

section for cable lugs and conductor sleeves in the table in the chapter “Connect-

ing the inverter” on page 21.

• Cable lugs and conductor sleeves.

For fastening the inverter you will require the following tools:

• Machine bolts (M4) with washers and self-locking nuts or

• self-tapping screws or wood screws.

No. in

fig. 8,

page 5

Label Description

1 Main switch

“ON/OFF/REMOTE”

Switches the device on, off or to operation via the

remote control (accessory)

2 “Input Level” LED Displays the input voltage range

3 “Load Level” LED Displays the power being supplied

4 Dip switch Makes settings on the inverter (such as mains voltage,

mains frequency, energy-saving mode).

5 AC input 230 V input

6 AC output 230 V output

7 Fuse Protects the inverter from overload.

The fuse can be pressed in again once it has trig-

gered.

8 Earthing screw Sets or removes the grounding bridge

MSI900-1800--IO-16s.book Seite 19 Dienstag, 20. Juni 2017 9:59 09