User manual

EN
Technical description SinePower
18
MSI900, MSI1300, MSI1800
The inverter has the following connections, displays and control elements on the
front:
MSI1800T
The inverter has the following connections, displays and control elements on the
front:
No. in
fig. 6,
page 4
Label Description
1 Main switch
“ON/OFF/REMOTE”
Switches the device on, off or to operation via the
remote control (accessory)
2 “Input Level” LED Displays the input voltage range
3 “Load Level” LED Displays the power being supplied
4 Dip switch Makes settings on the inverter (such as mains voltage,
mains frequency, energy-saving mode).
5 Safety socket 230 V output
No. in
fig. 7,
page 5
Label Description
1 Main switch
“ON/OFF/REMOTE”
Switches the device on, off or to operation via the
remote control (accessory)
2 “Input Level” LED Displays the input voltage range
3 “Load Level” LED Displays the power being supplied
4 Dip switch Makes settings on the inverter (such as mains voltage,
mains frequency, energy-saving mode).
5 AC output 230 V output
6 AC input 230 V input
7 Fuse Protects the inverter from overload.
The fuse can be pressed in again once it has trig-
gered.
8 Earthing screw Sets or removes the grounding bridge
MSI900-1800--IO-16s.book Seite 18 Dienstag, 20. Juni 2017 9:59 09