User manual

EN
Explanation of symbols SinePower
12
1 Explanation of symbols
!
A
I
2 General safety instructions
2.1 General safety
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection
• Damage to the product resulting from mechanical influences and excess voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
!
WARNING!
• Only use the device as intended.
• Do not operate the device in a damp or wet environment.
• Do not operate the device near any flammable materials.
• Do not operate the device in areas that are potentially explosive.
• Maintenance and repair work may only be carried out by qualified
personnel who are familiar with the risks involved and the relevant reg-
ulations.
• People (including children) whose physical, sensory or mental capac-
ities or whose lack of experience or knowledge prevent them from
using this product safely should not use it without the supervision or
instruction of a responsible person.
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
MSI900-1800--IO-16s.book Seite 12 Dienstag, 20. Juni 2017 9:59 09