User`s guide

Dome Sx Display User’s Guide, 020-0931-00 Rev. F | 5
About the Display
The Dome® Sx display systems, available in 3, 6, and 10 megapixels,
consist of a TFT LCD panel and a graphics board and driver.The
display’s thin film transistors, in a transmissive-type display, use an
integrated cold cathode fluorescent tube (CCFT) backlight system.
The new model of the Dome S3c display and the Dome S6c display
both use an LED backlight system.
The display is designed for medical imaging in diagnostic settings and
comes fully tuned with gamma correction that complies with the
DICOM Part 14 Standard. The all-digital design enables the display to
produce the sharp, crisp images critical to softcopy medical viewing.
Unwanted analog display image artifacts are eliminated.
For display classification and use; environmental guidelines; safety
precautions; handling, cleaning and storage tip; and specifications,
see “Technical Information” on page 12.
System Requirements
• Windows 7 (x86 or x64) or Windows XP Service Pack 3 (x86 or x64)
• Intel or AMD multi-core processor
• PCI Express x16 lane slot
• 50 MB hard disk space
• 512 MB RAM
• CD-ROM drive
• Power supply, 350 watts or greater