User`s guide

26 | Dome Sx Display User’s Guide, 020-0931-00 Rev. F
Dome S10 Specification
In locations where 240V outlets are used, connect the Dome S10 display to a center-
tapped, 240V, single-phase supply only (for Canada and the United States).
Category Characteristic Item Specification
LCD Technology TFT AMLCD Dual Domain IPS,
single 10-bit pixels
Screen size, diagonal 761 mm (30.0 in.)
Display resolution 4096 x 2560 pixels (landscape)
Pixel pitch 157 m, 161 DPI
Viewing angle 170° horizontal/vertical
Response time (Tr+Tf) 35 ms (typical)
Refresh rate 50 Hz
Optical Brightness 1250 cd/m
2
(typical)
Contrast ratio 850:1 (typical)
DICOM LUT 16-bit architecture with 0.2 JND precision
Colors supported Up to 1024 shades of gray, programmable gamma
from palette of up to 4096 shades of gray
Pixel arrangement Single pixel, IPS structure
Interface Display control -brightness/
contrast
DDC2B+
Display identification EDID read using DDC2B+
Display status Dual-stack tricolor LEDs on back panel
MQSA 2 color bottom facing LEDs on front of unit with
push-button activation
Panel
Connectivity
Video input 2 Dual Link DVI-D
Pixel data sizes 8-bit and 10-bit per pixel grayscale,
24-bit color mapped to luminance
VGA compatibility 640 x 480 to 1280 x 1024
USB interface USB B upstream port
Physical Display size (without stand),
H x W x D
699 mm x 473 mm x 80 mm
(27.5 in. x 18.6 in. x 3.1 in.)
Display weight (without stand) 7.7 kg (17 lb)
Display weight (with stand) 10.9 kg (24 lb)
Mounting options 100 x 100 mm VESA mounting standard.
Desktop stand includes height, pivot, swivel, and
tilt adjustment.
Power
Requirement
Adapter BridgePower BPM150S24F05 (with power switch)
(CAUTION: Use only the adapter supplied with unit.)