User`s guide

22 | Dome Sx Display User’s Guide, 020-0931-00 Rev. F
Dome S3c Specification
In locations where 240V outlets are used, connect the Dome S3c display to a center-
tapped, 240V, single-phase supply only (for Canada and the United States).
Category Characteristic Item Specification
LCD Technology TFT AMLCD Dual Domain IPS,
3 subpixels per pixel
Screen size, diagonal 541 mm (21.3 in.)
Display resolution 1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
Pixel pitch 211.5 m, 120 DPI
Viewing angle 176° horizontal/vertical
Response time (Tr+Tf) 40 ms LED backlight (typical)
24 ms CCFL backlight (typical)
Refresh rate 60 Hz
Optical Brightness 800 cd/m
2
(typical)
Contrast ratio 1400:1 LED backlight (typical)
750:1 CCFL backlight (typical)
DICOM LUT 16-bit architecture with 0.3 JND precision
Colors supported Up to 1.06 billion colors; up to 1024 shades of gray,
programmable gamma from palette of up to
2041 shades
Pixel arrangement R,G,B vertical stripe
Interface Display control -brightness/
contrast
DDC2B+
Display identification EDID read using DDC2B+
Display status Dual-stack tricolor LEDs on back panel
Panel
Connectivity
Video input DisplayPort 1.1 and Dual Link DVI-D
Pixel data sizes 8-bit, 16-bit, 24-bit, and 30-bit per pixel color
*
* 30-bit color is supported on DisplayPort only.
VGA compatibility 640 x 480 to 1280 x 1024
USB interface USB B upstream port
Physical Display size (without stand),
H x W x D
475 mm x 363 mm x 99 mm
(18.7 in. x 14.3 in. x 3.9 in.)
Display weight (without stand) 6.4 kg (14 lb)
Display weight (with stand) 9.3 kg (21 lb)
Mounting options 100 x 100 mm VESA mounting standard.
Desktop stand includes height, pivot, swivel, and
tilt adjustment.
Power
Requirement
Adapter BridgePower BPM150S24F05 (with power switch)
(CAUTION: Use only the adapter supplied with unit.)