User`s guide

20 | Dome Sx Display User’s Guide, 020-0931-00 Rev. F
Dome S3 Specification
In locations where 240V outlets are used, connect the Dome S3 display to a center-tapped,
240V, single-phase supply only (for Canada and the United States).
Category Characteristic Item Specification
LCD Technology TFT AMLCD Dual Domain IPS,
3 subpixels per pixel
Screen size, diagonal 541 mm (21.3 in.)
Display resolution 1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
Pixel pitch 211.5 m, 120 DPI
Viewing angle 176° horizontal/vertical
Response time (Tr+Tf) 27 ms (typical)
Refresh rate 60 Hz
Optical Brightness 1450 cd/m
2
(typical)
Contrast ratio 900:1 (typical)
DICOM LUT 16-bit architecture with 0.2 JND precision
Colors supported Up to 1024 shades of gray, programmable gamma
from palette of up to 3061 shades
Pixel arrangement LCR vertical stripe
Interface Display control -brightness/
contrast
DDC2B+
Display identification EDID read using DDC2B+
Display status Dual-stack tricolor LEDs on back panel
Panel
Connectivity
Video input DisplayPort 1.1 and Dual Link DVI-D
Pixel data sizes 8-bit, 10-bit per pixel grayscale,
24-bit color mapped to luminance
VGA compatibility 640 x 480 to 1280 x 1024
USB interface USB B upstream port
Physical Display size (without stand),
H x W x D
475 mm x 363 mm x 99 mm
(18.7 in. x 14.3 in. x 3.9 in.)
Display weight (without stand) 6.4 kg (14 lb)
Display weight (with stand) 9.3 kg (21 lb)
Mounting options 100 x 100 mm VESA mounting standard.
Desktop stand includes height, pivot, swivel, and
tilt adjustment.
Power
Requirement
Adapter BridgePower BPM130S12F02 (with power switch)
(CAUTION: Use only the adapter supplied with unit.)