User`s guide

Dome Sx Display User’s Guide, 020-0931-00 Rev. F | 17
Unpacking and handling tips
The Dome Sx display is a precision instrument that requires proper
care to maintain product operation and adherence to specification.
Unpack the display and components carefully, then set up and
handle the unit properly to avoid damage to the LCD panel.
• Use both hands to grasp the display case when lifting it from the
shipping carton, but avoid touching the screen.
• Do not apply pressure to the screen or touch the screen with bare
fingers or objects. Pressure can affect image quality. Cosmetics and
oils on the skin are both detrimental to the screen and difficult to
remove.
• Allow the display to warm up to room temperature before turning it
on. Avoid sudden temperature changes in the environment, as this
may cause condensation, which damages the display.
• Secure the display properly onto a standard VESA 100-mm
mounting unit if you elect not to use the desk stand.
• Do not set up the display near strong light or heat sources.
• Do not block the vents on the back of the display or install the
display in a built-in enclosure. Blocked vents cause excessive heat
to build up inside the display, increasing risk of fire.
• When installing components, turn off your computer, but leave it
plugged into a grounded outlet.
• Do not remove the back cover or disassemble the display. There are
no user-serviceable parts inside.