User`s guide

Dome Sx Display User’s Guide, 020-0931-00 Rev. F | 11
Video Cable Installation on Dome S6c and Dome S10 Displays
For both the Dome S6c and the Dome S10 displays, connect the
primary output from the graphics board (the bottom port) to the
primary input of the Dome S6c and the Dome S10 displays. (See
following illustration for the location of the primary input port on
the connector plate of each display.) Improper connection may
cause VGA boot messages not to appear on the display screen.
Primary video signal input on the Dome S6c connector plate
Primary video signal input on the Dome S10 connector plate