User`s guide

Getting Started | 5
Getting Started
The Dome CXtra software adds essential functionality to Dome
medical imaging display systems in diagnostic and referral settings.
By using the Dome CXtra suite of value-added services, you can
calibrate and maintain displays, run acceptance tests, and monitor
displays remotely. While the services operate as independent plug-
ins, they each use the Reporting service for listing properties, logging
events, and saving history.
Display Compatibility
CXtra services enhance the functionality of these display systems:
• Dome Ex
• Dome Gx
• Dome Sx
• Select Desktops, including Dome GX24, Dome GX2MP Plus, and
Dome GX2MP
You can also install the Dome CXtra software on systems using
third-party commodity monitors to enable DICOM calibration. See
“Enabling DICOM Calibration on Third-Party Monitors” on page 95.
NOTE: When you add or remove displays on the Windows desktop,
you must restart the Dome CXtra software by rebooting the system.
(Refer to ReadMe file for more information.)
WARNING: When the Dome CXtra application is running on the
system, power off the workstation before you either connect a DVI
cable to or disconnect a cable from the Dome display. Connecting or
disconnecting a DVI cable with the workstation power on may
corrupt the display EDID data.