User`s guide

What’s New in Version 6.x Series | 3
Windows Platform Support
Support is available for the Microsoft Windows 7 (x86 or x64) and
Windows Server 2008 R2 (x64 only) operating systems.
Support for the Microsoft Windows XP x64 operating system was
added to the Dome

CXtra 6.x series in an earlier version.
CXtra Utilities
Users can start, restart, and stop all CXtra services and application,
and run CXtradiag with utilities. Access the tools via the Windows
Start menu.
NOTE: Windows administrator privilege is required to run the utilities.
Users without privilege must enter an authorized username and
password as prompted.
Fast User Switching
The Fast User Switching feature is not supported on display systems
using NVIDIA drivers previous to version 197.03.
Installation Upgrades
The installation procedure for Dome CXtra is now simpler, faster, and
more reliable. All services and features are installed by default. To
customize your installation, you must deselect the service or
application feature you do not wish to install.
White Level Calibration
Correction of the display white level can now be done via manual
conformance testing or with the White Level Calibration service.
A one-time, end-user calibration of the white level may be necessary
when the target luminance is outside the tolerance established for
proper display conformance, such as when the white level of a display
has failed a manual conformance test, or when two or more displays
in a multi-unit configuration show disparate white levels. An external
photometer is required.