User`s guide

54 | Dome CXtra
MQSA Test Wizard
When you configure the MQSA test reminders, you can see due
status of tests to perform via LED indicators in the MQSA button
(on Dome S10 displays) and by the test wizard accessible via the
CXtra Services menu. Depending upon the display you are using or
how you access the test wizard—by the MQSA button (only on the
Dome S10 display), the CXtra Services menu, or the Windows Start
menu—the appearance of the wizard may vary.
Accessing the Test Wizard via the taskbar menu
When accessed via the CXtra Services menu, the test wizard shows
the due status of each category of tests. After a test is completed,
the wizard shows the next due date of that test.
Accessing the Test Wizard via the MQSA button
When you press the MQSA button, you gain access to each test
category as well as a toggle button that allows you to ignore a test
reminder for the length of the time you specified in the configuration
dialog, or to reset the ignore period. The Ignore Test command is
visible only when one or more tests are due.
The MQSA button is available only on the Dome S10 display. The
wizard that appears is equivalent to that accessible via the Windows
Start menu.
NOTE: On the Dome E5 display, access this same test wizard via the
taskbar or Windows Start menu. There is no button on the unit.
MQSA Test Wizard
that appears via the
CXtra Services menu