User`s guide

90 | Dome CXtra
To set up entries on the Displays tab
Review the characteristics of each display panel connected to the
computer. You can indicate how each panel is used by selecting
a performance class as described below.
1 Click the Displays tab.
2 Select a display in the Display pull-down list. The system supplies
values for the attributes shown, if known.
3 Designate the selected display as Primary or Secondary
performance class by clicking the appropriate radio button.
Designate a display as Primary (Class A) if it is used for medical
interpretation. All other displays should be designated Secondary
(Class B). The default designation is Primary.
4 Repeat steps 2 and 3 for each display.
5Click Apply.