User`s guide

AAPM TG18 Test Service | 87
2 Click Setup. The Photometers tab of the TG18 Test Setup
Information dialog appears.
To set up entries on the Photometers tab
1 If you have a supported photometer installed, select the model
name on the Photometer pull-down list. Otherwise, select Other. If
you select a supported photometer, the system automatically lists
the manufacturer’s name in the field provided.
2 If you selected Other, type the manufacturer’s name.
3 Enter the photometer serial number.
4 Select the COM port used to connect the photometer to
the computer on the COM Port pull-down list.
5 Click Apply. If you are not using a supported photometer,
a system warning message explains that you must manually
enter measurement values while completing tests. Click OK.