User`s guide

White Level Calibration Service | 37
Running the White Level Calibration Wizard
IMPORTANT: White level calibration via the White Level Calibration
service is available for use on all Dome CX and Dome EX displays.
Restoration of the factory white level calibration is available only for
Dome E2, Dome E3, Dome E3c, Dome E3cHB, and Dome E5 displays.
To calibrate the white level
First, open the CXtra Services menu and click White Level
Calibration Wizard.
Next, click Yes to proceed in replacing the factory calibration data
with the calibration data to be measured at your site.
Then, follow the calibration wizard to reinitialize the display panel.