User`s guide

14 | Dome CXtra
For Dome E2c, Dome E3c, Dome E3cHB, and Dome E4c displays, you
can set color coordinates for panel appearance in one of two ways:
• Select an option for panel appearance with blue, clear, or default.
• Use the LCD II photometer to perform color calibration
when you specify color coordinates by color temperature
(Kelvin scale) or by CIE xy coordinates.
Configuring the RightLight Service
If the Privilege service has been installed, you must log on as
a privileged user to change the RightLight configuration. (See
page 96.)
To configure the RightLight service
1 Open the Dome CXtra Services menu and select RightLight Panel
Configuration. The RightLight Panel Configuration dialog appears
with these tabs:
• Backlight
•Calibration
•Ambient
• Color
• Auto (Conformance) Alerts
• Manual (Conformance) Alerts
2 Check the selection box for each display you want to configure, or
click Select All.
3 Select a tab and change the settings as described in the following
sections. Click Apply to activate the changes without closing the
dialog; click OK to activate the changes and close the dialog.
Backlight tab
For displays selected, you can view the values of these parameters:
• Black level in cd/m
2
• White level in cd/m
2
• Backlight use in hours
• Brightness as a percentage of maximum effective brightness