User`s guide

108 | Dome CXtra
To enter traps information
1 Click the Traps tab in the SNMP Service Properties dialog.
2 Create the community name used by the SNMP console
application. Type that name in the Community name field then
click Add to List. (Dome Dashboard users: Be sure the community
name matches the SNMP trap community shown on the Dashboard
Edit Workstation dialog > Network Configuration tab.)
3 Create a list of trap destinations. Click Add to open an SNMP Service
Configuration dialog.
4 Enter information for each destination. (Dome Dashboard users:
The host name, IP, or IPX address must match the name of the
workstation on which Dome Dashboard is running.)