User`s guide

Installing Dome CXtra

When upgrading the software, all currently installed CXtra services are auto-selected for

updating. If you deselect a service during the upgrade, the installed service is removed.

WARNING: When the Dome CXtra application is running, power off the system before you

either connect a DVI cable to or disconnect a cable from the Dome display. Connecting or

disconnecting a DVI cable with the system power on may corrupt the display EDID data.

Display system

Make sure that your display is one of the models shown in this table:

Operating system

Windows 7 (x86 or x64), Windows Server 2008 R2 (x64), or Windows XP Service Pack 3

(x86 or x64).

Dome Ex Dome Sx Dome Gx

• Dome E2c

• Dome E2cHB

• Dome E3

• Dome E3c

• Dome E3cHB

• Dome E4c

• Dome E5

• Dome S3

• Dome S3c

• Dome S6c

• Dome S10

• GX4MP

• GX24

• GX2MP Plus

• GX2MP