Instructions

Tronic Mifare
INSTRUCTIONS
1
2
3
Batteries replacement
Measurements
IMPORTANT:
Battery replacement must
completed in less than 5 minutes.
The battery pack must remain
connected during the release of
the batteries (otherwise, the clock
will lose the programmed time).
1. Connect the battery pack.
2. Loosen the Torx 20 screw.
3. Remove the battery holder.
IP (keypad / lock case) ----/45
Working temperature -5ºC <> +70ºC
Latch force > 45Kgf
UV Rays > 10000h
Vibration 10 - 200 Hz 2g
Life cycles > 200000 cycles
Electrostatic discharge 8000 V
Battery life > 35000 cycles or 2 years
13,3
19,4
94
94
110
61
85,7
4,2
9,5
25,46
18,2
114
2,1
40
62
44,2