Specifications

Dolphin® 9500 Series Net Base Quick Start Guide 3
Power Supply
Setting up the Net Base
1. Make sure the power switch on the power adapter is in the OFF position.
2. Plug the power cord into the power adapter.
3. Plug the power connector cable into the power connector on the back of the
Net Base.
4. Plug the power cord into a standard wall outlet.
5. Plug the CAT-5 Ethernet cable into either of the RJ-45 connectors on the
back of the Net Base.
6. Plug the Ethernet cable into the network.
7. On the power adapter, turn the power switch to the ON position.
8. The COMM LEDs on all four slots flash binary codes as the Net Base finds
the DHCP server during the bootloader and kernel sequences.
LED Indicators
There are two LEDs per terminal well: the DOCK LED and the COMM LED.
Dock LED Lights solid green to indicate that the terminal is properly seated.
The terminal can communicate with the Net Base only when
properly seated in the well.
COMM LED Indicates the status of data transfer between the Dolphin terminal
and the Net Base.
Color Description
Solid Green
A USB connection is established between the
terminal and Net Base.
Power Cord
ON/OFF
Switch
ON Position
Power Adapter
Power
Connector
Cable