Specifications

10 Dolphin® 9500 Series Net Base Quick Start Guide
2. Turn the Net Base and DIN Rail right side up.
3. Secure the DIN Rail to the horizontal mounting surface.
Using the Wall Mount Kit
Wall mount kits can be purchased separately to secure the Net Base to a wall or
other vertical surface. For the Net Base, you need to purchase two kits so that
you have two mounting brackets, one for each end of the Net Base. Each
mounting bracket contains an open slot in the back to accommodate the
connector cables.
1. Insert the round end of a screw into the round end of each screw slot. Slide
each screw towards the narrow end of the slot.
2. Use one washer/nut set on each screw to secure the screw in each slot.
Screws in the narrow end of each slot