Specifications

8 Dolphin® 9500 Series Net Base Quick Start Guide
Charging
In addition to Ethernet communication, the Net Base charges the main battery of
each terminal in less than four hours. The intelligent battery charging system
incorporated into all Dolphin terminals prevents overcharging, which means that
Dolphin terminals may be stored in the Net Base indefinitely without damage to
the terminals, battery packs, or the Net Base.
Use only the Li-ion battery packs provided by Hand Held Products. The
use of any battery pack not sold/manufactured by Hand Held Products
in the Dolphin 9500 Series terminal will void your warranty and may
result in damage to the Dolphin terminal or battery.
Note:
The Net Base is compatible with all terminals in the Dolphin 9500 Series.
1. Install the Li-ion battery pack into the back panel of the terminal.
2. Slide the Dolphin terminal into one of the terminal wells until the Dock LED
lights solid green. Charging begins immediately.
Connecting the Dolphin Terminal to the Net Base
After the Net Base is installed, configured, and connected to the host computer,
you must connect the Dolphin terminal to the Net Base.
1. Insert a Dolphin terminal into a terminal well.
2. On the Dolphin terminal, tap Start > Utils > RASMan. The RASMan utility
initializes.
3. When the connection is established between the Dolphin terminal and the
Net Base, the terminal plays a sound and the communication icon appears in
the Navigation bar.
4. Upon connection, the Dolphin terminal is assigned an IP address from the
Net Base, which can be used by any application on the Dolphin terminal.
!
SC
A
N
E
S
C
T
A
B
S
F
T
AB
C
E
F
G
I
J
K
M
N
O
S
R
Q
U
V
W
Y
Z
D
H
L
P
T
X
N
U
M
E
N
T
1
2
3
7
8
9
4
5
6
;
:
*
@
F
1
F
2
F
3
F
4
F
5
F
6
F
7F
8
S
T
A
R
T
I
N
S
B
K
S
P
D
E
L
C
T
R
L
A
L
T
SE
N
D
E
N
D
P
O
W
E
R
V
O
L
P
G
V
O
L
P
G
+
+
-
0
,
S
P