Owner Manual

DOLCECLIMA AIR PRO
ENGLISH
EN - 25
4.2.b Error codes
During the appliance functioning, a few anomalies which stop its functioning could appear.
In these cases, some error codes appear on the control panel.
• P1 Lower tray full.
• Empty it by operating as described in paragraph 4.2.a
-------------------------------------------------------------------
• F1 Filters cleaning.
• Message F1 appears every 250 hours of operation of the fan motor.
 Proceedwiththelterscleaning(paragraphs4.1.b-4.1.c-4.1.d)andresetthehourscountingby
keeping key “ON/OFF” on the appliance control panel pressed for 5 seconds.
-------------------------------------------------------------------
• E1 Environment temperature sensor error.
• E2 Evaporator temperature sensor error.
• E3 Condenser temperature sensor error
• E4 Display panel communication error.
In these cases:
a. electrically disconnect the appliance
b. wait a few minutes
c. connect the plug to the power socket
d. restart the appliance.
Iftheinconveniencepersistsandtheerrorcodedoesn’tturnoff,electricallydisconnectthe
appliance and refer to an Assistance Centre.
5 - TECHNICAL DATA
For the technical data, please consult the data plate applied to the product (Fig.2).
• Dimensions(WxHxD) 490 x 765 x 425 mm
• Working temperature limits in
Cooling function
17°C÷35°C (62 F ÷ 95 F)
• Working temperature limits in
Dehumidicationfunction
13°C÷35°C (55 F ÷ 95 F)
• Working temperature limits in
Heating mode (heat pump)
5°C÷30°C (41 F ÷ 86 F)
• Refrigerantgas R410
6 - LIMITED WARRANTY USA
Dear Customer
Thank you very much for purchasing a Olimpia Splendid portable air conditioner
The terms of the limited warranty and technical assistance are given in the documentation accompanying
your appliance for any information please contact: [e-mail]
toll free nbr 1-201-741-0610
Please register your purchase at: www.olimpiasplendid.us
7 - WIRING DIAGRAM
See page “IT-27” for the wiring diagram.