Owner Manual

DOLCECLIMA AIR PRO
ENGLISH
EN - 21
c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.
d. Switchingo󰀨theapplianceoradjustingthetimersettingto“0.0h” will cancel the programmed switching
o󰀨function.
3.12 OTHER FUNCTIONS
3.12.a SILENT function
• This function can only be activated from the control panel of the appliance and is availableonly if
the room temperature is between 21 and 25 °C (71 and 77 F).
a. When the appliance is working, press key SW8 (speaker); The speaker symbol appears.
Ventilation speed automatically sets itself to minimum.
b. Press the key again to deactivate the function.
3.12.b SLEEP function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidication (DRY) and Fan Only (FAN) modes are
active.
a. When the appliance is running, press the key “SLEEP” on the remote control.
The icon appears on the control panel and on the remote control display.
.
The appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C (1 or
2°F) for 30 minutes.
b. Then, the appliance will decrease (when cooling) or increase (when heating) the set temperature by 1°C
(1 or 2°F) for an additional 30 minutes.
c. This temperature will be maintained for 7 hours before returning to the originally selected temperature.
Once this time has passed, the appliance will restart working as originally programmed.
d. Press the key “SLEEP” on the remote control to stop the function; the icon on the control panel and on
theremotecontroldisplayturno󰀨.
3.12.c FOLLOW ME function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidication (DRY) and Fan Only (FAN) modes are
active.
In this function, the remote control serves as a thermostat.
a. When the appliance is running, press the key “FOLLOW ME” on the remote control.
b. Movewiththeremotecontrol inanareaoftheroomdi󰀨erentfromwheretheapplianceispositioned
(maximum distance is 7÷8 metres) directing it towards the appliance itself and making sure there are no
obstacles between them.
c. Set the desired temperature on the remote control; the appliance works until it takes the temperature of
the area where the remote control is positioned to the value set on the remote control itself.
d. Theremotecontrolsendsasignaltotheapplianceand,ifitdoesn’treceivearesponsewithinamaximum
time of 7 minutes, the function deactivates.
e. Press the key “FOLLOW ME”ontheremotecontrolorswitchtheapplianceo󰀨tostopthefunction.