Owner Manual

ENGLISH

EN - 20

3.11 TIMER MODE

a. Thismodeallowstoprogramtheswitchingonortheswitchingo󰀨oftheappliance.

b. The delay time can be set, activated and cancelled both from the remote control and from the control

panel.

3.11.a Programmed switching on

a. When the appliance is in standby mode, select the operation mode, the desired temperature and ventilation

speed.

- On the control panel: - press

and set the switching on delay time with the keys +/-.

- To activate the function, press

or wait approximately 5 seconds so that

thesettimeonthedisplaystopsashing(thedisplayreturnstoshowing

the environment temperature).

The icon

lights up.

- On the remote control: - press the key “TIMER ON” to access the function and then press the key

“TIMER ON” once or more until the switching on delay time is set.

  - Directtheremotecontroltowardstheappliance;abeepconrmstheacti-

vation of the function.

- The icon

on the control panel and the indicator “Timer On” on the remote

control display light up.

b. Once the set time has passed, the appliance starts with the same settings (mode, temperature and ven-

tilationspeed)asthosebeforeswitchingo󰀨.

c. Time can be set with 30 minutes steps up to 10 hours and with 60 minutes steps from 10 to 24 hours.

d. Starting the appliance or adjusting the timer setting to “0.0h” will cancel the programmed switching on

function.

3.11.b Programmed switching o󰀨

a. When the appliance is running,setthedelayedswitchingo󰀨time.

- On the control panel: - press

andsettheswitchingo󰀨delaytimewiththekeys+/-.