Owner Manual

MODE
SW1
SW2
SW3
SW4
SW5
SW7
SW8
SW6
S3
D1
D2
S1
S2
S12
S11
S10
S9
S8
S4
S5
S6
S7
B
S13
ENGLISH
EN - 14
3 - USE OF THE APPLIANCE
The functioning modes if the air conditioner can be selected both through the remote control and through the
control panel located on board of the air conditioner.
Thereceptionoftheselectedfunctionisconrmedbytheemissionofa“beep”bythebuzzer.
3.1 - CONTROL PANEL SYMBOLS AND KEYS (Fig.B)
•SW1: ON/Stand-by;
•SW2: Operation mode selection
 ECO-Blueair(auto)=˃
 =˃fanonly=˃
 =˃dehumidification=˃
 =˃heating
(active only in the version with heat pump) =˃
 =˃cooling=˃
 =˃turbocooling=˃...
•SW3: Temperature/delay increase
•SW4: Temperature/delay decrease
•SW5: Display
•SW6: Conrmation/cancellationunitswitchingon/
o󰀨delay
•SW7: Fan speed selection
Minimum speed =˃
 =˃Mediumspeed =˃
 =˃Maximumspeed =˃
 =˃Blueair(auto)
•SW8: “SILENT” function selection
•D1: Set temperature/Timer
•D2: Fan speed indication (see “SW7”)
•S1: Hour indicator
•S2: Temperature indicator in °C
•S3: Temperature indicator in °F
•S4: Fan only mode
•S5: Cooling mode
•S6: Dehumidicationmode
• S7: Heating mode (active only in the version
with heat pump)
•S8: Sleep mode
•S9: Timermode(programmedswitchingon/o󰀨)
•S10: Automatic mode (ECO)
•S11: “Silent” function active
•S12: Appliance electrically powered indicator
•S13: Turbo function