Owner Manual

212223
24
25
26
26
27
28
29
30
31
32
33
34
35
36
A
ENGLISH
EN - 10
1 - DESCRIPTION OF THE APPLIANCE
1.1 - LIST OF THE COMPONENTS SUPPLIED (Fig.5)
The appliance is packaged singularly in a cardboard packaging.
The packaging can be transported by hand by two operators or loaded on a forklift.
Store the packaging singularly; do not stack it.
1. Flexible hose for air expulsion (cooling and
automatic mode)
2. Terminalforexiblehosemachineside
3. TerminalforexiblehoseforSLIDERinstallation
4. SLIDER for installation on sliding / roller window
5. Locking bracket + screws for window locking
6. Terminalforexiblehoseforxedinstallation
7. Flangeforxedinstallation
8. Seal for SLIDER installation
9. Seal for SLIDER installation
10.Plugsforxedinstallationange
11. Remote control
12. Condensation discharge pipe
 (dehumidicationmodeonly)
13. Terminal adapter for condensation discharge pipe
14. Manual
15.Additionallters
1.2 - IDENTIFICATION OF THE MAIN COMPONENTS (Fig.A)
21. Control panel
22. Air outlet grille
23. Flap
24. IR remote control receiver
25. Wheels
26. Handel
27. Airltergrille
27a.Airlter
28. Condensation drain cap (for use as
 dehumidier)
29. Air inlet grille
30. Extractableairlter
31. Hole for plug housing
32. Cap for condensation emptying (in case of
transport, maintenance or excessive accu-
mulation of water)
33. Cable winder
34. Power supply cable
35. Condensation drain cap (only for version
with heat pump)
36. Air outlet grille