Manual
Table Of Contents
- Contents
- 1 Introduction to Dolby Object Authoring Tool DP590 documentation
- 2 Overview of Dolby Object Authoring Tool DP590
- 3 Installation of Dolby Object Authoring Tool DP590
- 4 Dolby Object Authoring Tool DP590 operation
- 4.1 Creating new or opening existing session
- 4.2 Saving session
- 4.3 Adding beds and dynamic objects
- 4.4 Modifying input channel routing
- 4.5 Enabling beds and dynamic objects for presentations
- 4.6 Setting production renderers
- 4.7 GPIO configuration
- 4.8 Monitoring local output
- 4.9 Monitoring loudness value
- 4.10 Monitoring 5.1-channel downmix
- 4.11 Monitoring dynamic range control
- 4.12 Monitoring audio meters
- 4.13 Connecting to DP591
- 4.14 Sending metadata to DP591
- 5 Error log
- Glossary
1.2 Speaker name abbreviations
Speaker names used for DP590 output.
This table lists the names of speakers that receive output, as well as their abbreviations.
Table 1: Speaker abbreviations
Speaker name Abbreviation
Left L
Right R
Center C
Low-Frequency Effects LFE
Left Surround LS
Right Surround RS
Left Front Height LFH
Right Front Height RFH
Left Rear Height LRH
Right Rear Height RRH
1.3 Questions and feedback
Support services are available to address any questions about this hardware product or its
documentation.
For any questions regarding the described technology, contact
broadcastsupport@dolby.com.
If you have comments or feedback about this information set, send us an email at
documentation@dolby.com.
1.4 Branding guidelines
The branding guidelines provide additional information to assist you in designing your
product.
•
Dolby Audio brand guidelines
, Dolby Laboratories, available from http://
www.dolbysecure.com.
Introduction to Dolby Object Authoring Tool DP590 documentation
Dolby Object Authoring Tool DP590 quick-start guide
Preliminary 10 May 2017 7