Manual
Table Of Contents
- Contents
- 1 Introduction to Dolby Object Authoring Tool DP590 documentation
- 2 Overview of Dolby Object Authoring Tool DP590
- 3 Installation of Dolby Object Authoring Tool DP590
- 4 Dolby Object Authoring Tool DP590 operation
- 4.1 Creating new or opening existing session
- 4.2 Saving session
- 4.3 Adding beds and dynamic objects
- 4.4 Modifying input channel routing
- 4.5 Enabling beds and dynamic objects for presentations
- 4.6 Setting production renderers
- 4.7 GPIO configuration
- 4.8 Monitoring local output
- 4.9 Monitoring loudness value
- 4.10 Monitoring 5.1-channel downmix
- 4.11 Monitoring dynamic range control
- 4.12 Monitoring audio meters
- 4.13 Connecting to DP591
- 4.14 Sending metadata to DP591
- 5 Error log
- Glossary
2.5 Specifications and requirements
Familiarity with the dimensions, environmental specifications, and power requirements of
the DP590 promotes better operational success. We recommend that you review this
information prior to first use of the component.
2.5.1 Environmental specifications
These are the temperature and humidity operating ranges for the DP590.
The Dolby Object Authoring Tool DP590:
•
Operates at temperatures between 10º and 35ºC
•
Supports operation with relative noncondensing humidity levels between 5% and 90%
2.5.2 Power requirements
These are the DP590 power minimums and maximums.
The DP590 operates with a power input of between 100 and 240 VAC, 50–60 Hz, and 350 W.
2.5.3 Dimensions
These are the physical dimensions of the DP590.
•
Height: 44 mm (1.75 in)
•
Width: 483 mm (19 in)
•
Depth: 394 mm (15.5 in)
•
Weight: 6.5 kg (14.5 lb)
Overview of Dolby Object Authoring Tool DP590
Dolby Object Authoring Tool DP590 quick-start guide
Preliminary 10 May 2017 11