Datasheet

3
Dolby DP590 Broadcast Audio Object Authoring
AES Outputs
Four BNC female connectors, unbalanced, 75Ω, signal levels per AES-3id-1995 (SMPTE 276M)
MADI Output
One BNC female connector, unbalanced, 75Ω, signal levels per AES-10id-2005
Headphone Output
6.35 mm (1/4-inch) standard stereo headphone jack for confidence monitoring
Media Ethernet Port
RJ45 connector for 1000Base-T Ethernet; not used
Control Ethernet Port
RJ45 connector for 1000Base-T Ethernet; provides status and control through a web-based user interface
Audio processing
Input:
Up to 32 PCM channels at 48 kHz
Output:
Up to 32 PCM channels at 48 kHz
Loudness measurement
ITU-BS.1770-4 and EBU R-128
System management:
SNMP 1.2 support
Power Specifications
• Power supply Dual, hot-swappable from rear
• Input voltage range 100–240 VAC
• Input frequency range 50–60 Hz, autosensing
• Power consumption 350 W
Physical
• Dimensions 1-U rackmount: 44 × 483 × 394 mm (1.75 × 19 × 15.50 inches)
• Weight Net: 6.5 kg (14.5 lb.)
Environmental
• Cooling Front to rear airflow
Temperature-controlled fans
• Operating Temperature 0°C–40°C (32°F–104°F),
• Storage Temperature 0°C–40°C (32°F–104°F),
• Operating Humidity 20%–80% relative humidity (noncondensing)
Regulatory Notices
North America:
UL, FCC, and CE compliant
Europe:
Complies with the European Union Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and
electronic equipment (RoHs), as amended by Commission Decisions 2005/618/EC, 2005/717/ EC, 2005/747/EC (RoHs Directive), and WEEE
Dolby Laboratories, Inc. 1275 Market Street, San Francisco, CA 94103-1410 USA T [phone] dolby.com
Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories.
Dolby Digital Plus is a trademark of Dolby Laboratories. © 2017 Dolby Laboratories, Inc. All rights reserved.
Dolby DP590 Broadcast Audio Object Authoring—March 1st, 2017