Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Professional Reference Decoder DP580 documentation
- 2 Overview of the Dolby Professional Reference Decoder DP580
- 3 Getting started
- 4 Dolby Professional Reference Decoder DP580 operations
- 5 Dolby Professional Reference Decoder DP580 administration
- 6 Event and system logs
- Glossary
Procedure
1. On the DP580 web client UI, under System, select the Network page.
2. Verify that the network interface status and configuration settings are valid for your current
decoding environment, and make changes as necessary.
3. Select the Admin page, and then verify that the remaining system settings are acceptable.
Make changes as necessary.
5.1.2 Resetting the system settings
You can reset the DP580 to its original settings at any time on the Admin page.
Procedure
1. From the web interface home page, under System, select Admin.
The administration page is displayed.
2. Scroll down to the Reset System Settings section, and then click the Reset button.
The unit reverts to its original default settings.
Dolby Professional Reference Decoder DP580 administration
Dolby Professional Reference Decoder DP580 v2.0 user's guide
16 January 2018 30