Installation manual

UEX/650 Upgrade Kit Installation
13
User Menu
123 7456 8
DIP switch 6 DOWN
The options shown in bold are the default settings when the unit was shipped from the factory.
menu
OK
menu
OK
Notes
Format and CP650 status display
This is the top-level
menu display.
1
Fader Setting Local/Auditorium Local/Auditorium
2
Preset Fader Levels
Format:
Fader level set:
1,4,5,10,11,U1,U2,NS
0–10 or None
3
Auto Dolby Digital Enabled/Disabled Enabled/Disabled
4
Auto Digital Target
Select Target Format:
Format 10 or Format 13.
5
Automatic Optical Level Adjust
Projector 1
Run Cat. No. 69T test film
Press OK to start.
Press OK to save.
6
Automatic Optical Level Adjust
Projector 2
Press OK to start.
Press OK to save.
7
Manual Optical Level Adjust
Projector 1
Set level
Press OK to start.
Press OK to save.
8
Manual Optical Level Adjust
Projector 2
Set level
Press OK to start.
Press OK to save.
9
User Format 1 select
Select Format to assign
to the U1 button
Default is Format 13.
10
User Format 2 select
Select Format to assign
to the U2 button
Default is Format 65.
11
Nonsync Format select
Select Format to assign
to the NS button
Default is Format 60.
12
Mute Fade-in Time 0.2–5 Seconds
13
Mute Fade-out Time 0.2–5 Seconds
14
Power-on Format select
Select from Format list or
select Last Format used.
Select from Format list
or select Last Format
used.
15
Contrast Adjustment Set the display contrast.
16
Event Log
Scroll up and down the
event listing.
17
About this CP650, Screen 1
• Control software version
number
• Optional boards installed
18
About this CP650, Screen 2
•
Software module version
numbers
Useful for telephone
discussions with your
service engineer.
19
About this CP650, Screen 3
• Network address
• Board version numbers
The version numbers
are listed for each
board in the following
order:
Cat. No. 772
Cat. No. 773
Cat. No. 774
Cat. No. 777
Cat. No. 794
"x"= Board not installed
20
Return to the top-level menu display
System Software v1.1xx
New