Installation manual

UEX/650 Upgrade Kit Installation
8
Saving Changes...
U
ser
F
orma
t
2
>
>>
>Format 80
Digital Input
U
ser
F
orma
t
2
> Format xx
format name
Assign Format 80
After the connections have been made, the digital input format (Format 80) must be
assigned to one of the user-definable format buttons U1, U2, or NS. Using the PC
setup software, select Format 80 from the pull-down list for the format button to be
assigned, or use the CP650 front-panel menu steps shown below.
Press the left menu button multiple times to
move to the User Format 1, 2, or NS menu.
This example shows the U2 button.
Rotate the fader knob to select Format 80 from
the list. "Digital Input" will display.
OK
Press the OK button to save the assignment to
the Format button.
Press the illuminated Format button to return to
normal operation.