Specifications
Table Of Contents
- Table of Contents
- List of Figures
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Production Environment
- Chapter 4 Equipment
- Chapter 5 Production Techniques
- Chapter 6 Preparing the Source Delivery Master
- Chapter 7 Miscellaneous Information
- Appendix A Mix and Mastering Data Sheets
5.1-Channel Production Guidelines Equipment
4-8
Figure 4-3 Typical DAW with Multichannel Panner
Each of these workstations positions the surround mix through either the output bus
path or the auxiliary buses. These outputs are typically routed to a multichannel
digital mastering deck (e.g., ADAT or DA-88, etc.). However, in order to have
consistent levels feeding the multitrack recorder that do not affect your overall
monitoring/listening levels, it may be desirable to route the outputs of the multitrack
recorder back through another set of grouped input faders on the console and route
them to a separate set of output buses to your monitoring system. See Figure 4-4.